FlipPost Desktop: PC DIAG SRP $119.95                      Laptop: PC DIAG SRP $119.95 

  "Proceed to Secure Check Out" " PC Diag Privacy Policy"

       PC Diag SRP: $175.95    Sale Price $79.95  You Save! $100.00

FlipPost PCI & ISA and Laptop Mini-PCI & MiniPCI-Express slot Test Cards Descriptions Below:

 FlipPOST PCI & ISA Motherboard Test Card Description:  

PCI/ISA FlipPost motherboard test card is the perfect low-cost solution to high-priced troubleshooting. PCI/ISA FlipPost lets you cut service costs to the bone. It shows self-test codes and power supply status when power is switched on. Now you can SEE what's wrong with a system that won't boot, even if the screen is blank! Just plug the card in an ISA or PCI slot, switch on power, and watch the digital display. The digits are displayed on both sides of the Card. If a failure is detected by the system self-test, it will halt, and the failing test number will be on the FlipPOST display. Just look the code up in the accompanying manual, and you will instantly see why the system did not boot.

Special Features

• Flip POST Card is compatible with ISA/EISA Bus and PCI Bus Slots.
• Instantly Shows why System Won't Boot
• Troubleshoot your dead motherboard.
• Digits display on Both Sides
• Small hexadecimal digital LED display shows BIOS Power-On Self Test (POST) codes when system is first turned on. All segments light during Reset.
• Digits display on BOTH sides of the card.
• LED's readable from either side of the card
• Edge connector fits in XT, AT, EISA, PS/2 Model 25 & 30, Compaq, ISA, PCI clones.
• Computer to monitor POST codes in.
• Trap Reset switch (1) puts Reset detector in trap or continuous mode.
• LEDs show power supply voltages, Reset, Oscillator, BIOS, Clock and, Run Status
• Remembers previous codes in memory which can be recalled using the forward or backward buttons.
• OEM documentation is tailored for the specific BIOS and can include troubleshooting tips and any BIOS POST codes.
• Includes Remote Digital Display cable
• Extra features like freq, voltage checks
• Includes external speaker cable for beep codes

How To Use

Use this card to troubleshoot your motherboard problems. Sometimes your computer will not boot. Use this diagnostic card to see the POST (power on self test) codes that the BIOS commands the motherboard to perform. Each motherboard has a BIOS chip which is a device that initializes all hardware components on the motherboard such as CPU, memory, video card, etc. During the boot up sequence, your BIOS will also generate what is called POST80 code. Each code can be referenced in a manual supplied to help determine the problem with the motherboard. If your code is NOT LISTED in our manual, chances are you have a newer motherboard.

Visit the manufacture of your BIOS and download the manual of your BIOS direct. In most cases, where the last post code is displayed on the POST card is generally the problem area. For example: If you have an Award Bios on your motherboard, and you install this card. Turn on the power to your computer. Your computer stops booting, but the POST card shows a code of “01″. This could mean you have a faulty CPU on your motherboard because the BIOS told the CPU to start, but the CPU did not respond. If a piece of hardware does not respond during a boot sequence, then the motherboard will not finish POSTing.

Easy to Configure and Use

There are NO jumpers or switches to set. Just plug the card into any ISA - OR - PCI slot and switch on power. Then watch the LEDs and digital display for failure symptoms. At power-on the system BIOS (Basic Input Output) performs a self-test of the system components. For each test the BIOS sends a test (POST) code to the digital display on the PCI POST card. If the test fails the display halts, showing the failing test number. Then just look up the code in the accompanying documentation to pinpoint the problem. Often you can fix it within minutes.

FlipPOST Cuts Service Cost

When your technicians use PCI/ISA FlipPOST to debug dead PCs, they need only ONE POST card to do the work of TWO! Instead of buying separate cards for ISA and PCI slots, you can use PCI/ISA FlipPOST to troubleshoot either type of system. That saves you money on test tools, and it saves your technicians from having to look for the right card. Furthermore, your tech's NEED the card to reduce their PC repair time. Time spent swapping components to isolate a fault is wasted time YOU pay for and money you will never get back. Our customers have regularly stated that these cards pay for themselves over and over and over. Every professional technician should have his own.

FlipPOST allows you to identify computer problems even when the monitor, keyboard, or disk drives are not working. It can help you diagnose up to 256 different system failures by displaying the codes generated by built in software in a PC.

The FlipPOST documentation has a complete description of POST codes for ALL major BIOS manufactures. Whenever you are installing or troubleshooting PCs and Networks or add-in PC adapters, some of the common and frustrating problems you face are PCI P-n-P signals.

FlipPOST is the only active hardware tool in its class to provide you with a true solution to ISA and PCI signal problems. The reason this is important is that bus transactions can be locked up by faulty adapter cards that do not handshake signals properly. FlipPOST monitors the major transaction signals so you will know if a handshake did not occur properly.

Mini-PCI & MiniPCI-Express Laptop Motherboard Test Card Description:

Laptop Motherboard miniPCI Express Test Card - is the perfect low-cost solution to high-priced troubleshooting. Our miniPCI-E Test Card lets you cut service costs to the bone.

It is easy to install, yet extremely powerful to use. With our diagnostic card in hand, you no longer have to go through the tedious and time consuming process of trying to figure out what is wrong with your PC hardware. The miniPCI Express card will tell you exactly what is wrong with your PC in just seconds. It will save you time and money. Our new diagnostic test card will work with almost all the most popular types of CPU's, Motherboards and BIOS.

System Requirements

Laptop Motherboard mini PCI Express Test Card only requires an empty mini-PCI or mini-PCI-E expansion slot. It is no necessary to install memory chips to perform an analysis."POST Codes" are displayed through the hexadecimal display panel on the PC Diagnostic Card itself.

This product troubleshoots laptop style motherboards through the Mini Card PCI-E (1/2 slot) or Mini PCI (full slot).

EVOLUTION - Dual Mini Card PCI Express and Mini PCI Slot

In laptop machines, the Mini Card PCI Express (PCI-E) replaces the Mini PCI card standard slot design, which is a small internal card functionally identical to standard desktop computer PCI cards. Mini Card PCI-E and Mini PCI cards are used mainly to add communications functions to portable laptop computers that are built- or customized-to-order. The Mini Card PCI Express is half the size of the Mini PCI cards. This allows system designers to include one or two cards, depending on the size constraints of a particular portable computer. Our Diagnostic Card has BOTH SLOT TYPES to allow for this technology transition.

• Works with Laptop Only Motherboards
• Troubleshoot your dead motherboard.
• External display to easily view POST codes

HOW IT WORKS

Use this card to troubleshoot your motherboard problems. Sometimes your computer will not boot. Use this diagnostic card to see the POST (power on self test) codes that the BIOS commands the motherboard to perform. Each motherboard has a BIOS chip which is a device that initializes all hardware components on the motherboard such as CPU, memory, video card, etc. During the boot up sequence, your BIOS will also generate what is called POST80 code. Each code can be referenced in a manual supplied to help determine the problem with the motherboard. If your code is NOT LISTED in our manual, chances are you have a newer motherboard. Visit the manufacture of your BIOS and download the manual of your BIOS direct. In most cases, where the last post code is displayed on the POST card is generally the problem area. For example: If you have an Award Bios on your motherboard, and you install this card. Turn on the power to your computer. Your computer stops booting, but the POST card shows a code of “01″. This could mean you have a faulty CPU on your motherboard because the BIOS told the CPU to start, but the CPU did not respond. If a piece of hardware does not respond during a boot sequence, then the motherboard will not finish POSTing.

When the machine is turned on , the hexadecimal display should show the various POST codes as the system executes (unless it has a rare BIOS that does not display POST codes). If the machine does not boot, system POST has detected a fatal fault and stopped. The number showing in the hexadecimal display on the test card is the number of the test in which POST failed, simply refer to the manual.

The miniPCI Express Notebook Diagnostic Card is the only active hardware tool in its class to provide you with a true solution to mini-PCI or mini-PCI-E. The reason this is important is that bus transactions can be locked up by faulty adapter cards that do not handshake signals properly. The Notebook motherboard Test Card monitors the major transaction signals so you will know if a handshake did not occur properly.

If you are a service professional, you need the miniPCI Express Test Card, so order it now. If you are a computer hobbyist, our Laptop Test Card can easily save you the value of its cost in one service call by a professional who has one. That means it pays for itself fast, AND you can use our notebook test card to help your friends, or start your own home business troubleshooting computers.

Our new and improved design of the Laptop Diagnostic Card can work with almost all popular types of CPUs, Motherboards, and BIOS.

  "Proceed to Secure Check Out"     " PC Diag Privacy Policy"

                 PC Diag's Suggested Retail Price: $179.95         Sale Price $79.95     You Save $100.00!